2.4GHz wireless DMX transceiver


  • Made and engineered in Germany
  • Seamless integration with any Ape Labs fixture and Ape Labs remote control
  • All-metal design with premium components
  • 1,000-foot DMX range (extend the Ape Remote’s range from 100 feet to 1,000 feet)
  • Can be used as receiver/repeater to extend DMX range farther than 1,000 feet

The W-APE 2.4 GHz wireless DMX transceiver will transmit a DMX-512 signal up to an impressive 1,000 feet.

It’s more than just a wireless DMX transceiver, though. Part of the beauty of Ape Labs fixtures is their simple design. Most wireless fixtures don’t have any control buttons or LCD screens, so in order to set the DMX channel and to adjust their internal settings, a W-APE (or MobiLight 4) is needed. To start programming, simply turn a wireless fixture on while it’s near the W-APE. The screen that would normally display on the lighting fixture will instead display on the W-APE. If you press any button within a few seconds, you’ll be in the light and adjusting settings. (The light will indicate it’s receiving your adjustments by subtlety blinking a dim blue.) When you’re done, just wait five seconds. The W-APE screen will turn back to its own, and the fixture will remember all your settings. It doesn’t matter if you turn the fixture off or if the batteries die; your settings will be locked in until you change them again.

Don’t have a DMX controller? No problem. The W-APE has some onboard controls for simple DMX programming. It also has an intelligent microphone so you can synchronize MusikMode across all fixtures with a centralized microphone. You can even mix and match different Ape Labs fixtures. If you have the Ape Labs remote control, extend the wireless range from 100 feet to 1,000 feet by pairing it with the W-APE.

Finally, the W-APE can be used to wirelessly update any new Ape Labs firmware on your fixtures right from home.

Dealers for this product

Scope of Delivery
Measurement/Tech Specs


  • wireless DMX transmitter and receiver
  • high transmission power (2.4 GHz)
  • setup unit for all ape labs products without display
  • sound-to-light master unit for alle ape labs products
  • 3 pin. Neutrik XLR-plugs
  • 4 group management
  • Transmission of up to 4 DMX universes at the same time possible with 4 W-APE units

Scope of Delivery

W-APE wireless DMX (Art.No.1024, EAN 4260482880163)

  • 1x W-APE wireless DMX transceiver
  • 1x Power supply 100-240 V
  • 1x Omnidirectional antenna

Measurement/Tech Specs


  • Size and Weight: 19.7 x 19.7 x 5.6 cm
  • 1 kg
  • Power requirement: 100-240 V / 50-60 Hz